AC700 Temposonic® Interface Card
The AC700 Temposonic® card provides multiple digital interfaces for MTS® I, MTS® II, LP and LH Temposonics probes. Through the use of user installable jumpers, the interface card meets all interfacing needs for MTS® linear transducers.
Firmware Features
- +5vdc regulator installed on board
- Capable of interrogating transducers > 100ft
- Heavy duty Entrelec connectors used for high vibration environments
- Board thickness is .120" to provide for solid non flexing in high g-force environments
- All firmware soldered directly to board
- User installable jumpers for configuring the board
- Board jumpers include 1-8 Recirculations, external/internal interrogation, MTS® I and MTS® II, jumper configuation for MTS® II probes using DPM's
- Red Power status and Yellow Run status LED's mounted on the board and located on a printed operating/troubleshooting truth table overlay
- Servo valve connections on board terminals
- Labeled terminal connections
- Installation and operation manual provided with each unit
- Timing selection for probes 0 to 48" and 48" to 170"
Power Requirements
C700 Power Requirements
| Voltage | Current | Tolerance |
|---|---|---|
| External + 5V Supplied | ||
| + 15 VDC | 50 mA | + 14.25 to + 15.75 VDC |
| - 15 VDC | 25 mA | - 14.25 to - 15.75 VDC |
| + 5 VDC | 200 mA | + 4.75 to + 5.25 VDC |
| No External + 5V | ||
| + 15 VDC | 275 mA | + 14.25 to + 15.75 VDC |
| - 15 VDC | 25 mA | - 14.25 to - 15.75 VDC |
Tenpsonics Probe Power Requirements
| Voltage | Current | Tolerance |
|---|---|---|
| MTS I Probes | ||
| + 15 VDC | 5 mA | + 14.25 to + 15.75 VDC |
| - 15 VDC | 20 mA | - 14.25 to - 15.75 VDC |
| + 5 VDC | 25 mA | + 4.75 to + 5.25 VDC |
| MTS II Probes | ||
| + 15 VDC | 150 mA | + 14.25 to + 15.75 VDC |
| - 15 VDC | 100 mA | - 14.25 to - 15.75 VDC |
Operating Temperature
- -40 TO 150°F ( -40 to 66°C)